ISOMOVE is the machinery for physiotherapy and rehabilitation developed by TecnoBody to evaluate and simultaneously increase the strength and strength of moving muscle groups.
Not only an optimal system for an isokinetic test essential to analyze the values of strength and physical endurance, but also an ally to establish a personalized and effective rehabilitation path.
Two fundamental elements of the ISOMOVE Isokinetic system to guarantee perfect movement control:
ISOMOVE is equipped with both elements.
The torque motor is able to deliver 450 N/m and electronically control the system with sampling frequency at 1250 Hz.
The balance of these two elements allows a smooth, safe, linear and precise movement.
ISOMOVE exploits isokinetic and simultaneously simulates the elastic phase with the exclusive Flex Control function.
In practice, exercise with the rubber bands is very widespread, and many clinical studies have proven qualities such as fluidity, continuity and a concentric-eccentric natural movement.
ISOMOVE demonstrates its full potential with unprecedented electronic control that simulates an elastic system thanks to the exclusive Flex Control software.
In the development of the ISOMOVE system, the TecnoBody Research and Development Center has created a mechanic of extreme precision that guarantees the transmission of movement as accurate as possible. Also at the tibial contact point, critical for the high energy transfer, ISOMOVE is equipped with a linear guide with axial bearings to eliminate any friction.
The result is a perfect movement, perceived as fluid and natural by the patient.
The ISOMOVE system is equipped with a horizontal adjustment of the seat, inclination of the backrest and the fulcrum of rotation that together align the center of rotation of the knee with that of the system.
ISOMOVE is the ideal physiotherapy machine for a correct flexion-extension of the knee.
ISOMOVE is a system of evaluation of the knee joint force in ISOKINETICS, ISOMETRIC, ISOTONIC and CPM mode.
|Dimensions||Base: 110 cm x 110 cm x 150 cm
PC: 60 cm x 80 cm x 100 cm
|Tipe of system||ISOKINETIC system monoarticular (knee)|
|Use modality||Isokinetic Concentric/Eccentric - Isotonic - Isometric - CPM|
|Function||Soft Stop in ISOKINETIC and CPM|
|Sampling frequency||From 100 hz To 500 hz|
|Maximum couple of ISOKINETIC module||450 N/m|
|Arm Type||Dynamic arm for a further accuracy in the measurements|
|Settings||Adjustable chair height (for limb dimensions), depth (for the seat)|
|Electric Supply||230 VAC, 50 hz, 9 A|
|Power consumption||2 KW|
|Conformity||Directive 93/42/EEC - Standard EN 60601-1|
The isokinetic resistance mode allows the patient to maintain a constant speed throughout the movement. You can set:
CPM mode of passive movement allows immediate intervention for all patients and in all phases of their rehabilitation.
Patients can carry out the rehabilitation phase in CPM safely using the torque limitations, which can be set from 1 Nm. If the torque limit is exceeded during an eccentric contraction, the system stops and, once back below the limit of established torque, the restart of the year is allowed.
The passive speed can be adjusted between 1 ° / s and up to the 30 ° / s limit.
Isometric mode is commonly used in the pre- and post-operative phase.
The ISOMOVE system provides for the use of this mode allowing optimal positioning in the arc of movement of 120 °.
The maximum isometric torque is set at 450 Nm.
The isotonic mode, however, allows you to set a resistance to constant movement with a variable exercise speed. This is ideal for the simulation of constant load work throughout the entire movement.
The isotonic resistance can be adjusted between 1 Nm and up to the 400 Nm limit.
Would you like more information about our products or would you like instructions? Fill out the form on the side, we will reply as soon as possible.
Fields marked with * are mandatory.
Tel.: +39 035 594363